What’s New About PA’s Management of Fill Policy
Effective January 1, 2020, the Pennsylvania Department ofEnvironmental Protection (PADEP) is enforcing significant changes to theManagement of Fill Policy (readit here). Here are the key points you need to know:
The policy is important to anyone who moves fill
Developed in 2004, original Management of Fill Policy wasdesigned to facilitate the unrestricted movement of uncontaminated material,such as soil, asphalt, brick, block, concrete and stone within the state ofPennsylvania. The policy is important to a variety of industries becauseit defines when and under what circumstances fill material can be moved andused without beingregulated as a waste under the Pennsylvania Solid Waste Management Act(“SWMA”). SWMA regulates solid waste storage, collection, transportation,processing treatment and disposal, requiring county plan development, permitsand licenses, and establishing the Solid Waste Abatement Fund. In short, thanksto this policy, if you are moving uncontaminated material, your actions areless regulated, and life is easier.
The new policy contains a lot more detail than theprevious one
According to the Associated Pennsylvania Contractors (APC),the updated 2020 policy “is a comprehensiveoverhaul of the existing version of the policy.” APC’s Risk AllocationCommittee has been working with PennDOT to develop a practical solution tothese updates, including discussions regarding the need for testing if biddocuments indicate that testing is ongoing.
While PADEP will largely maintain the same process for determiningwhether fill material can qualify as clean fill, there are several importantchanges to how such determinations will be made. Some changes include:
- Fill material is now a defined term, limited tosoil, rock, stone, gravel, used asphalt, brick, block or concrete fromconstruction and demolition activities that is separate from other waste, anddredged material as defined in the municipal and residual waste regulations
- Analytical testing of fill material (except forhistoric fill) is not necessary unless environmental due diligence indicatesthat the fill material may have been affected by regulated substances
- If testing is performed, the results must becompared to the clean fill concentration limits, which are standards used byPADEP to determine whether fill material is labeled uncontaminated
- Fill material that does not qualify as cleanfill may still be beneficially used under a residual waste general permit(WMGR-096) if it qualifies as regulated fill
The new policy contains much more detail regarding themanner in which due diligence must be performed and how sampling is to beundertaken. There is also debate around exactly how historic fill istreated under the new policy, an issue particularly relevant in the state ofPennsylvania.
Fill material that has already been used is grandfatheredin
Fill material that has already been used is not subject tothe new policy, unless and until that fill material is moved to another site. Similargrandfathering protections apply to fill material that has been determined tobe clean fill prior to January 1, 2020, “unlessthe fill is moved to a new receiving site or off the project area orproject right-of-way after the effective date of this policy.”
For pending projects, fill material that has been determinedto be clean under the previous policy and has been stockpiled for use at aparticular receiving site is likely to avoid needing to meet the new requirements.
We can help you through it
For over 30 years, the BAI Group has provided technicalconsulting services to private and public entities typically involved withenvironmental development projects. The services we traditionally provide ourclients include studies, designs, permit applications, constructionmanagement/CQA along with other compliance monitoring and reporting activities.Contact us today for acost-effective approach to your specific needs.
